New Utility Application

Wire/Conduit/Cable Occupancy Application (NCRR form 210)

The following is a checklist of items that shall be completed when submitting this application for a proposed Pipeline Occupancy of the NCRR Corridor. Please place a check by all items listed below once they are included with the application package. For more detailed descriptions of the requirements below see Form NCR 102.

Application Package to Include^*

Soil borings in accordance with Form NCR 102 Section 3.1
Calculations for internal and external loads on all pipes, manholes and other facilities to be installed on NCRR’s Corridor
Deflection calculations for flexible casing pipe
One hundred (100) year storm drainage calculations for all pipes, ditches and other structures carrying surface drainage on NCRR Corridor and/or under NCRR track(s)
- Hydraulic analysis of any existing ditch and/or structure impacted by the proposed improvements
- Design calculations for overhead pipe bridges and their foundations
- Sheeting design calculations

Plan and Profile Submittal Requirements^*

All applicable requirements set forth in Form NCR 102 for all pipeline occupancy applications
Additionally, all applicable requirements set forth in Form NCR 101 if any portion of the pipeline occupancy application is aerial

General Plan View Requirements^*

All existing and proposed railroad tracks shown and labelled
North arrow
Scale
‘To’ labels for the next town, city or station in either direction along the railroad
Name of the town and county in which the proposed facility is located
Angle of crossing relative to railroad track(s)
Distance (in feet) to lowest milepost (see application)
Show and label the NCRR Corridor boundary as “NCRR Corridor” and non-operating NCRR property lines as “NCRR Property” (Remove all other Right-of-Way or Property boundaries within the NCRR Corridor)
Show dimensions from the NCRR Corridor boundary to the centerline of the NCRR Corridor, centerline of the nearest track and the overall width of the NCRR Corridor
Dimension distance from the crossing to any turnouts
- Indicate any facilities to be abandoned (Add note in accordance with NCR 102 Section 2.6)
- If occupancy is within or adjacent to a roadway at-grade crossing:
  - Show roadway edges of pavement, dimension width and roadway name
  - Show edges of pavement with dimensions from edge of road to centerline of proposed pipeline
- Location of vents, if any, and height above ground
- Location of markers and an example of text on the proposed markers
- Location of existing above and below ground utilities
- Note indicating method of installation
- Size and material of the casing pipe
- Length of the casing pipe on NCRR Corridor
- Size and material of the carrier pipe
- Show launching and receiving pits that are within the NCRR Corridor. Dimension from the pits to the nearest centerline of track. Dimension the length, width and depth of the pits.
- Details of any excavation or sheeting necessary to install the pipeline in accordance with NCR 102 Section 5.9.1.C
- A cross section of the pipeline showing the carrier pipe, casing pipe and any supports
- Note in accordance with NCR 102 Section 1.6.1.C.10 regarding NCRR Specifications

Additional Plan View Requirements for Aerial Transverse Crossings and Longitudinal Occupancies^*

Indicate the overall length of the occupancy on each page
Dimension the distance from centerline of closest track to centerline of pipeline

General Profile View Requirements^*

Scale
Indicate which direction the section is looking
All existing and proposed railroad tracks shown
Show and label NCRR Corridor boundary
Profile above the centerline of the pipe showing the relationship of the pipeline and/or casing pipe to the ground levels, tracks and other facilities
Note in accordance with NCR 102 Section 1.6.1.C.10 regarding NCRR Specifications

Additional Profile View Requirements for Underground Transverse Crossings^*

Show theoretical embankment lines for all existing and proposed tracks per NCR 102 Section 4.3.1.F.5.
Show launching and receiving pits that are within the NCRR Corridor. Dimension from the pits to the nearest centerline of track. Dimension the length, width and depth of the pits.
Show depth of pipeline under existing ground where it enters and exits the NCRR Corridor

Additional Profile View Requirements for Underground Longitudinal Occupancies^*

Show the top of rail profile of the nearest track

If application is approved, applicant agrees to reimburse the North Carolina Railroad Company and the Operating Railroads for any cost incurred by the North Carolina Railroad Company and the Operating Railroads incident to installation, maintenance, and/or supervision necessitated by this pipeline installation, and further agrees to assume all liability for a ccidents or injuries which arise as a result of this installation.

Submit Application

Carrier

Total buried length on the NCRR Corridor:

Feet

Number empty:

Number filled:

Conduit

Number of cables or lines in each conduit:

Feet

Number of conductors in each cable or line:

Encasement Material:

Outside diameter:

Wall thickness:

Wireline voltage:

Volt

Bury depth from base of rail to top of casing:

Feet

Bury depth below ditches:

Feet

Minimum depth on the NCRR Corridor but not beneath tracks:

Feet

Number of wire

Wire Type:	Number of conductors:	Material:	AWG Gauge:
Cable TV	2	Copper	2
Fiber Optic	2	Copper	2

Type of Wires

Cable TV

Number of conductors:

Material:

Copper

Aluminum

AWG Gauge:

Telephone

Number of conductors:

Material:

Copper

Aluminum

AWG Gauge:

Electric Power

Number of conductors:

Material:

Copper

Aluminum

AWG Gauge:

Voltage:

No. of Phases:

Amperes:

Hertz:

Maximum voltage:

Maximum Current:

Maximum fault to ground current:

Communications

Number of conductors:

Material:

Copper

Aluminum

AWG Gauge:

Fiber Optic

Fiber Cables Count:

AWG Gauge:

Number of fibers per cable:

Identify each intended user of the conduit/cable:

Other

Please Specify:

New Utility Application

Wire/Conduit/Cable Occupancy Application (NCRR form 210)

Project Information Step 1 of 4

Facilities Step 2 of 4

Files Uploads Step 3 of 4

Applicant's Checklist Step 4 of 4

Application Package to Include^*

Plan and Profile Submittal Requirements^*

General Plan View Requirements^*

Additional Plan View Requirements for Aerial Transverse Crossings and Longitudinal Occupancies^*

General Profile View Requirements^*

Additional Profile View Requirements for Underground Transverse Crossings^*

Additional Profile View Requirements for Underground Longitudinal Occupancies^*

New Utility Application

Wire/Conduit/Cable Occupancy Application (NCRR form 210)

Project Information Step 1 of 4

Facilities Step 2 of 4

Files Uploads Step 3 of 4

Applicant's Checklist Step 4 of 4

Application Package to Include*

Plan and Profile Submittal Requirements*

General Plan View Requirements*

Additional Plan View Requirements for Aerial Transverse Crossings and Longitudinal Occupancies*

General Profile View Requirements*

Additional Profile View Requirements for Underground Transverse Crossings*

Additional Profile View Requirements for Underground Longitudinal Occupancies*

Application Package to Include^*

Plan and Profile Submittal Requirements^*

General Plan View Requirements^*

Additional Plan View Requirements for Aerial Transverse Crossings and Longitudinal Occupancies^*

General Profile View Requirements^*

Additional Profile View Requirements for Underground Transverse Crossings^*

Additional Profile View Requirements for Underground Longitudinal Occupancies^*